Car Brake Oil Changer is creating the best oil changing system so you can easily use it without spending money and waste the time with the mechanic. This Oil Changer will prevent the air to enter into the brake system, The Brake Pressure Kit helps you to change the oil manually so you don't have to indulge in the messy work just pump the tanks after opening the bleed valves. This brake system is the most advantageous tool which is easy to keep and you can change the oil with ease.
PREVENT AIR FROM ENTERING YOUR BRAKE SYSTEM: The ABN | Automotive Brake Pressure Bleeder Kit includes a brake bleeder pump that allows for one-person brake fluid changes; With this brake fluid bleeder kit, there is no need to continually watch the fluid level as you manually pump the tank and simply open the bleed valves. GET THE JOB DONE: One man brake bleeder kit includes filling and operating instructions for your convenience; The pressure from the tank reservoir consistently tops off the fluid inside the brake master cylinder and allows for one-person use; Simply fill bleeder with fresh fluid, pressurize bleeder, open bleeder valves, depressurize tank, disconnect; fill the bleeder with new brake fluid, attach the cap onto the brake reservoir, pump up to 10psi, and then loosen the bleeder ports one at a time. USE ON YOUR VEHICLE: 1.8-inch (45 mm) master cylinder cap inside diameter (ID) with quick disconnect port for easy setup; Brake bleeder bottle is interchangeable with your existing caps to fit a wider variety of vehicles; Fits American and European cars including most Alfa Romeo, Audi, Bentley, BMW, Fiat, Land Rover, Lamborghini, Mercedes, Mini Cooper, Porsche, Renault, Volvo, Volkswagen, Bugatti, Chevy, Chrysler, Ford, Toyota. BUILT TO LAST: 0-70 PSI and 0-5 Bar dual gauge with 10-15 PSI (0.7-1 Bar) recommended operating pressure and 30 PSI (2 Bar) maximum working pressure; Built for rigorous use and recommended for any do-it-yourself weekend warrior as it is constructed with a robust plastic tank reservoir and aluminum plunger with spring term to pressurize your brake system. PACKAGE CONTENTS: Brake bleed kit includes (1) 3-liter tank with a 45 mm master cylinder cap, 40-inch (101.6 cm) long hose with quick disconnect, Dual PSI / Bar pressure gauge, manual pump handle, pressure relief valve, and instructions; This master cylinder bleeder kit does not include a bag or bottle to catch fluid that you bleed out but you can easily use any existing container you have on hand.